Organux VSTi .:. Organ VST emulation (Cathedral, Baroque, Church, Gothic, Farfisa, B3 .:. Syntheway Virtual Musical Instruments

Organux VSTi

Overview

Organux is a virtual organ VST plug-in designed for creating a wide range of classic and modern organ sounds.

Features

Hybrid method that combines sampling and synthesis techniques.
Selector with 20 predefined types of organ sounds such as:
Baroque Pipe Organ
Cathedral Organ
Farfisa Organ
Ethereal Organ
Chorus Organ
Pipe Organ
Church Organ
Percussive Organ
Gothic Organ
Fast and Slow B3 Organ
Rock Organ
Blues Organ
Detuned Organ
Electronic Organ, and more...
LFO (Low Frequency Oscillator) with modulation depth, frequency, offset, waveforms (sine-triangle-square) add expressive effects such as "Tremolo" by using the simple GUI commands, or also can be controlled by the position of a ball by clicking-and-dragging in an X-Y axis. The panning slider controls the output effect distribution between left and right speaker.
Multiple-Mode Filter that includes LP (Low pass), BP (Band pass), HP (High pass), notch, peak, low pass and high pass shelving filter with adjustable cutoff and bandwidth. The values are automatically computed when you select any of the filter types.
ADSR envelope generator with Attack, Sustain, Decay and Release parameters and several modulation targets.
16 presets for effects ready to play.
Portamento/Glide control: A gliding effect that allows a sound to change pitch at a gradual rate, rather than abruptly, when a new key is pressed or MIDI note sent.
Reverb effect built-in: Customizable with user controls for: size room, width room, damping factor & mixer.
Delay effect built-in: Creates a delay (echo) effect on audio signals controlled by amount of feedback and modulation of delay time.
On-screen MIDI keyboard that can be played with the mouse, or keyboard (Q is Middle-C, Z two Octaves lower) The 'T' on the left of the keyboard sets Toggle Mode where each key stays held until you click it a second time.
MIDI Channel selector : 1 to 16 channels.
FULL MIDI Automation: Complete MIDI Continuous Controller. You can use this to automate parameter changes from a sequencer, or to control your synthesizers from an external MIDI control surface.

:: MIDI Implementation Chart for ORGANUX:

:= FULL MIDI Automation =: Complete MIDI Continuous Controller (Control of all parameters for use with external hardware control). The following MIDI CC messages are recognized and affect the described parameters:

MIDI CC # - Controller Name

CC# 01 - LFO DEPTH (Modulation Wheel)
CC# 03 - LFO FREQ.
CC# 09 - LFO OFFSET
CC# 10 - PANNING EFFECT
CC# 14 - WAVEFORM

CC# 05 - GLIDE - Portamento Time -
CC# 07 - MASTER VOLUME

CC# 20 - CUTOFF - MULTI-MODE FILTER
CC# 21 - BANDWIDTH - MULTI-MODE FILTER
CC# 22 - GAIN for EQ Peak, High/Low Shelf - MULTI-MODE FILTER
CC# 23 - FILTER TYPE - MULTI-MODE FILTER

CC# 71 - DECAY - ENVELOPE GENERATOR
CC# 72 - RELEASE - ENVELOPE GENERATOR
CC# 73 - ATTACK - ENVELOPE GENERATOR
CC# 74 - SUSTAIN - ENVELOPE GENERATOR

CC# 88 - REVERB SIZE ROOM
CC# 89 - REVERB WIDTH ROOM
CC# 90 - REVERB DAMPING FACTOR ROOM
CC# 91 - REVERB MIX LEVEL

CC# 102 - DELAY MODULATION
CC# 103 - DELAY FEEDBACK

System Requirements

Operating System : Windows® 98SE/ME, Windows® 2000, Windows® XP, Windows® Vista.
Linux Operating System (Requirements)
Processor: Pentium®, Celeron® or equivalent - 500 MHz or more.
RAM: 64 MB of memory (128 MB recommended)
VST 2.0 Host application like: FL Studio 7.xx, 6.xx, Steinberg Cubase VST 5/32, Cubase VST 5 Score, Cubase VST 5 Standard, Cubase SL 1.xx, 2.xx, Cubase SX 1.xx, 2.xx, 3.xx, Synapse Orion Pro 6.xx 7.xx, Synapse Orion Platinum 6.xx 7.xx, Sony Acid Pro 5.xx 6.xx, Mackie Tracktion 2.xx, Audio Mulch 1.0, 1.0rc1, 0.9xx, Steinberg Nuendo 1.xx, 2.xx, 3.xx, Samplitude 8.xx 9.xx, Cakewalk's SONAR 5 Producer Edition and Studio Edition, SONAR Home Studio 4 and Home Studio 4 XL, Bram Bos Tunafish 1.xx, M-Audio Ableton Live 5.xx, M-Audio Evolution Sound Studio II Standard & Pro 2.xx, PowerTracks Pro Audio, Making Waves Audio & Studio 5.xx and more ...
Graphics (minimum): 16-bit 800x600
Work with other hosts, as a DirectX plug-in using the FXpansion Vst-Dx V3/4 adapter or running ToneWise's DirectiXer 2. Is the easiest way to gain access to the hundreds of VST plug-ins from your DirectX audio application. Compatible with the Cakewalk Audio line (v6 and higher), FASoft N-Track, Sound Forge and Vegas (as an Aux effect only, in Vegas), Acon Digital Media Acoustica 4.0 (Effects only) Syntrillium Cool Edit Pro, and many more.
Via FXpansion's VST-to-RTAS Adapter: M-Audio Digidesign Pro Tools M-Powered Recording Software.
Via FXpansion's VST to AudioUnit Adapter for Mac OS X: A highly-integrated plug-in wrapper that allows users of AudioUnit-compatible applications to integrate VST plug-ins and instruments seamlessly in to their working environment.
Other Components: PC configured according to the specifications of the host application
An ASIO® soundcard is recommended for low latency real-time play.

Installing and Uninstalling VST Plug-in

To install VST plug-in, follow these steps:

The files must be in a directory where the VST host is looking for VST plug-ins.
Unzip and extract *.rar file
RAR file contains *.dat & *.dll files.
Put both files into VST Plug-ins Folder of your host application.

Note: RAR file extension: The files are compressed with WinRar for minimum file size. RAR is a format like ZIP. It is a compressed archive. You must to extract the RAR contents using WinRAR: It's free from www.rarlab.com/download.htm. Like unzipping a *.zip file, extract "*.rar" into VST Plug-ins Folder. (RAR Contains "*.dat" & "*.dll" files). Right click on *.rar, select 'extract Files' from the menu.

To uninstall simply remove the *.dat & *.dll files of your VST Plug-ins folder.

Version History

v1.0: Initial version.

Plug-in Credits

Design, optimization, DSP and GUI by Daniel Alberto Laiseca

Evaluation & Registration

The code for the licensed and evaluation versions of this software are identical. The Demo Version is full functional. You can do anything you can do with the full version, you can even save your presets. Also in the demo are some presets included to demonstrate the instruments capabilities. The only restriction:

The Demo generates a short beep in all output channels every 10 seconds.
THE REGISTERED VERSION DOES NOT HAVE THIS INTERMITTING NOISE.

The program is a SHAREWARE. You are hereby licensed to use this software for evaluation purposes without charge for a period of 30 days. If you use this software after the 30 day evaluation period a registration fee is required.

The full version is available to purchase, as downloadable software, the price is US$32, and you can download the full version as soon as your payment is received (normally the same day)

Paypal (www.paypal.com), the Internet's leading payment network

PayPal allows anyone to send and receive money instantly through a secure method of online payment.

Make payments with PayPal - it's fast, free and secure!

KVR Audio Plugin Resources

VST is a trademark of Steinberg Soft- und Hardware GmbH


	::: Organux is a virtual organ VST plug-in designed for creating a wide range of classic and modern organ sounds. -------------------- Hybrid method that combines sampling and synthesis techniques.-------------------20 predefined types of organ sounds such as: 'Baroque Pipe Organ', 'Cathedral Organ', 'Percussive Organ', 'Gothic Organ', 'Fast B3 Organ', 'Slow B3 Organ', 'Chorus Organ', 'Pipe Organ', 'Church Organ', 'Rock Organ', 'Farfisa Organ', 'Blues Organ', 'Ethereal Organ' , 'Detuned Organ', 'Electronic Organ', and more... --------------- LFO (Low Frequency Oscillator) with modulation depth, frequency, offset, waveforms (sine-triangle-square) add expressive effects such as "Tremolo" by using the simple GUI commands, or also can be controlled by the position of a ball by clicking-and-dragging in an X-Y axis. The panning slider controls the output effect distribution between left and right speaker. ---------------- Multiple-Mode Filter includes LP (Low pass), BP (Band pass), HP (High pass), notch, peak, low pass and high pass shelving filter with adjustable cutoff and bandwidth. The values are automatically computed when you select any of the filter types. ---------- ADSR envelope generator with Attack, Sustain, Decay and Release parameters and several modulation targets. -------------- 16 presets for effects ready to play. Portamento/Glide control: A gliding effect that allows a sound to change pitch at a gradual rate, rather than abruptly, when a new key is pressed or MIDI note sent. --------------- Reverb effect built-in: Customizable with user controls for: size room, width room, damping factor & mixer. ------------ Delay effect built-in: Creates a delay (echo) effect on audio signals controlled by amount of feedback and modulation of delay time. ----------------- On-screen MIDI keyboard that can be played with the mouse, or keyboard (Q is Middle-C, Z two Octaves lower) The 'T' on the left of the keyboard sets Toggle Mode where each key stays held until you click it a second time. -------------- MIDI Channel selector : 1 to 16 channels.---------------------- FULL MIDI Automation: Complete MIDI Continuous Controller. You can use this to automate parameter changes from a sequencer, or to control your synthesizers from an external MIDI control surface. = = = = = Design, Optimization, DSP and GUI by Daniel Alberto Laiseca = = = = = = = = = = -: - -:All instruments & effects are VST 2.0 plug-ins. You need a PC to run them and a compatible host software -: